Recent content by f1maxis

Tightening torques (Inch-Pounds) Connecting Rod...90-100 Crankcase Halves...120-145 Cylinder Head...96-120 Flywheel...480-540 Spark Plug...240-246 To convert to Foot-Pounds divide by 12.

Try here: https://www.nymarine.ca/ They have all kinds of decals/parts/paint/etc. for older motors.

Yep, that one should work just fine. Basically just about any puller that uses the 3 bolts holes in the flywheel instead of pulling on the outside surface of it. I use a $10 "harmonic balancer" puller from NAPA and it works great.

Also...you can find parts diagrams, part numbers, etc. for your motor here: https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1968&hp=9.5&model=MQ-14D

With no spark, I would certainly lean towards the coils if they've not been replaced recently. The coils, points and condensers are relatively easy to replace once you get the flywheel off. If I were you, I would go ahead and replace them all while you're in there especially if you don't know...

Try this site: https://nymarine.ca/index.html

I bought a new, never used, B&S 5HP from a guy on CL last year to try on my 1436 Alumacraft flatbottom and was very disappointed. With me, my buddy and our gear, we could barely get 5-6 mph via GPS. It was very slow, tried different mount positions, etc. and it never got any better. Ended up...