Recent content by larlarsa

if you dont use fuse on other electronic,than dont need to use on FF and TM too. :twisted:

look what i did with picture.you have to put fuse or breaker in between electronic. .

The ring looks like for the pos wire from your battery, and you need a bus bar to connect all neg, then one wire to battery neg.

here what i did mine.

Thank's Doug, i thaink i need to upgrade to pro series.

No one have this problem??

i am in CANADA,i brought mine with a guy in here just cad $2.70 each, it come with 3 lead bub in a waterproof housing with wire direct to the battery,you can buy it in series,four colour ,withe,blue,red,green.it is very bright,i test it,but i didn't install on my boat yet...

you can buy jump boots cable from auto shop.

I have a motorguide fresh water series FW46 FB foot control trolling motor, mine one i feel very loose on handling in rough water condition,it is very fee on heel to toe movement,is it any way to adjust it a little bit for more easy control?i know many people use eclectic foot control now in...

OK,let me check the timer wire first,because i have the pump hookup direct to the battery before,no problem.

i have install a Timer from Basspro shop to my livewell,the timer come with a 3A inline fuse ,but everytime when i trun it on the fuse was brun.is that mean my livewell pump need to use a higher amp fuse ,or the fuse is for the light on the timer.how's the livewell pump usealy drawing amp?

ok, thank's

the picture from the top was cap from other post,but my boat is the same design or they are same brand. i dont know ,maybe look like this.

i have a boat simmiler to this one.i want to remove the middle seat and than use some angle to refoce the middle of the hull like the picture at the bottom,add a plywood on top to made the floor.do you guys think that's storng enought to refoce the hull without the middle seat??

How do i know my trailer tongue weight,my boat is 14Ft alumi with 20hp.