Recent content by Mr. Fahrenheit

For sure. I got a thread goin' on jack plates. Very good info in there. Good pics of many different styles of home made jack plates. >>>> https://www.tinboats.net/forum/viewtopic.php?f=3&t=29000

Whats the length on that there motor shaft? And how did that other motor work out?

Just to give a little light on how i plan on putting this on. I gotta drill a few more holes to attach the wood to the overhang on the top. I dont need it adjustable. Call me old fashioned but i think this should do me just fine. I obviously need to put a piece of wood on there slightly larger...

That's radical. If it doesnt work out, put some wings on there and you got a 14' airplane.

Yeah there will be a piece of wood attached to the steel plate for the motor to clamp on to. Also i will have wood between the plate and the aluminum on the back of my boat.

The long/tall flat part of it is going against my transom, with the two bends running vertical, facing out towards the back. I will put a picture up tomorow of me holding it by hand. I plan on doing some grinding on my trailer and possibly my boat tomorrow. The purpose of this plate is only to...

That is my jack plate. I didnt want to set it back a few inches, and i made this at work... Which saved me 84$ at the least!

SO: here is my solution. Today at work i whipped this up. It's like .17something stainless steel. The aluminum we use at my place of business (misery..!) is very soft, so i decided to go with steel. It was 16x18 to start, put 2" bends on the sides of it for support. I know it would have been...

SO: here is my solution. Today at work i whipped this up. It's like .17something stainless steel. The aluminum we use at my place of business (misery..!) is very soft, so i decided to go with steel. It was 16x18 to start, put 2" bends on the sides of it for support. I know it would have been...

Dude. I am wow'd. That is a nice looking piece of floatery. This thread specifically answered many questions i had reguarding how to do my own rig. I really like the rod holder you've got going on there. I couldnt really come up with any conclusions on how to keep mine secure, and from...

Well, I have a new plan. I am going to deck the whole front half, with a rod locker extending on one side of the boat. Livewell and storage compartments, ive got it alllll planned out... :D ... and a lower floor in the back. I decided i am going to take the bench seats out. Every one of them...

Oh by the way, it is indeed a 14'. Its an old Alumacraft Model F. Im not sure what year. Quite old tho, im guessing 60s.

I made these at work today. They will be the bases for my pedestals of my seats.(saved me 100 bucks!) 7x7 Stainless steel, Tig welded a stainless steel tube on there. To test the welder's skill i had him do a mock up, and i smashed it with a hammer in a vice for a while. I beat the crap out of...

Yeah, i have a fairly shallow boat. Its an old Alumacraft Model F. Im thinking im going to need to run 2 batteries in there too.. (fishfinder, trolling motor, and pumps.. etc) Im going to go with 3/8 plywood i think, cause I only weigh 160. So maybe the thin plywood will shave off a little...

Yeah, that was kinda my plan running the 2x4s underneath forward back and side to side, in a cross, intersecting at the base of my seat. So they will be about 6 or 7 inches apart, depending on how big the base of my seat is. If i feel like i should or could get away with using 2x2s, i will just...