So I belong to a lot of different forums that have to do with my various hobbys. Mostly F150's, Hockey and Fly fishing. Usually everyone is very quick to jump to offer advice and help. On here it seems everyone just wants to tell you your wrong WRONG !without offering any real advice. So...
I have been doing some work on my 12 ' V hull, just basically a comfort deck and a higher casting deck in the front. I bought the boat used for 150 bucks and took it out 3 times without any leaks before tearing the seats out and starting the conversion. I am going to paint the outside of the...
What would you suggest for sealing the plywood?
I am planning on making outriggers out of 6 inch pvc that protrude about 18 inches from each side of the boat. I want to be able to fight a 40 inch pike on the long rod easily in this thing.
I already sealed the bottom side and edges of the plywood with 2 coats of deck stain. Gonna do the top while its down.
Foam is light yet it does weigh something. Trying to keep it as light as possible. Foam only helps if your capsized and I don't plan on that ever.
Mostly 2x4's ripped in...
Here's how I attached the lower decking frame. made some L brackets out of the old seats I tore out. Used 7/16's self tappers through the ribs and a deck screw into the wood.
Well that's why I was asking. If I just spray caned the whole thing with primer could I use just regular exterior paint mixed to the gray primer? Or do I have to use some other type of paint?
Hello all this is my first post. I recently purchased a 12' v hull and have started my conversion. I tore out all the factory bench seats and have framed a deck 3.5 '' up from the bottom from the transom 6' out. From there it steps up 5 1/2 '' to a higher casting deck the rest of the way...