Recent content by ss christy

I'd stick to the .38 spl. With +p ammo. Most 357 mag snubnoses now have ports drilled into the barrel to ease recoil, which is good but if you were to fire it in your house in a home defense situation [god forbid] you'd be disoriented and probably rupture an eardrum from the sound of the shot...

Thanks, yeah I just put tinboats.net so he'll come ovr here to see it. The other site might delete cause they'll think I'm promoting something but we'll see. Hope they don't. Also thanks for putting that up there, now I can enter a tourney since I have a livewell.

Just put a link to here, nevermind. It might get erased but that'll be there loss.

A question was asked about making a live well. Now can I copy the making a livewell here and post it there? Not wanting to steal anyones idea or nothing, just helping a fella angler.

Sorry about what happened and prayers going out. I guess I'm kinda devils advocate here I have pits and they are used as therapy dogs, ie; going to retirment homes, childrens hospitals and the like, and when I hear things like this it saddens me. Hope I don't turn in to the black sheep here on...

Just posting so if anybody has the same problem and does a search. It turned out that my copper watertube came disconnected from the powerhead. Had to seperate the clamshell housing, pull out the powerhead assembly, then disconnect the exhaust housing from the powerhead to reinsert the watertube...

will do. i think i have a big problem with the copper water tube, the way it moves freely like tat. also when i shoot water up it under pressur, instead of coming out the thermostat housing it comes out in the hole where the drive shaft goes up into the upper part of the motor.

It's the latter I believe. The pee hole is on top. There's an according type hose from the motor to the housing. I took off the thermostat and left it off, started and no water came shooting out. So i believe my problem is still down below. I took off the lower and checked all the waterways with...

Thanks for the replies, yeah I bent the splines the same as the old one. If looking at the impeller sitting in the housing, they were bent to go in a clockwise position. I'll try the weedeater line now as well. Was that right, going in a clockwise position?

Bought the waterpump kit and changed everthing but it still wont shoot out water from the port. What do I check next? Put everything back toghether the way I took it apart, maybe wrong from the beggining or.....? Where is the thermosat? thanks for any replies, been lurking here awhile