I’m using a 4” foam roller. It turned out better than what i thought. I’ve done 2 coats and have enough paint for a 3rd.
I’ve got my daughter rolling and I’m coming right behind her so it’s not drying as fast.
Thanks ! I went to the hardware store and asked the paint Dept what I needed, I bought a fine bristle brush and he too suggested to thin the paint. I thinned and used the fine brush but it seemed to dry really quickly. It was sunny and the tin was getting pretty warm. It was the 1st coat, so...
I'm using Rustolium topside paint over self etching primer. I've sanded the primer with 200 sandpaper. When I roll and tip. There are still brush marks in the paint. I'm barely running the brush over the paint. Am I putting too thin a coat on? This is for the 1st coat. Will I need to sand...
I will probably use this
https://www.rustoleum.com/product-catalog/consumer-brands/marine-coatings/topside-paint/
About half the price of the total boat.
I've got all the metal on the topside sanded and primed with the self etching primer. I was going to paint with Rust-Oleum. Do I need to put another regular primer coat down before the Rust-Oleum?
Thanks for the help.
I'm rebuilding the transom on a Tracker Deep V17. It originally had bolts going through the transom and I was thinking on using rivets instead. The Phillips heads of the bolts got all chewed up and we're a pain to get out. I was looking at replacing the with hex head bolts or the closed end...
More tear out. The previous owner put more plywood (non-coated or painted) over the original. The foam was waterlogged. It’s going to rain all weekend so I’m not sure if i will get more done.