Search found 593 matches

by perchjerker
13 Sep 2019, 07:22
Forum: Sell it, buy it, swap it
Topic: 33lb Minn Kota bow mount cable steer 12v 42" shaft
Replies: 0
Views: 23

33lb Minn Kota bow mount cable steer 12v 42" shaft

Cable steer works fine just old upgraded to a larger motor located in Farmington Hills Michigan $110

I looked up the serial number and its a 2000 model year 42" shaft
It came on the 16.5 ft smokercraft side console I bought earlier this year

thanks
by perchjerker
12 Apr 2019, 09:06
Forum: Jon and V boat Conversions and Modifications
Topic: New project 14ft Meyers V Hull
Replies: 83
Views: 22696

New project 14ft Meyers V Hull

Sorry

Jim I really loved that slider seat base. Very high quality and great communication with the maker of it as I had a few minor questions
by perchjerker
12 Apr 2019, 09:01
Forum: Jon and V boat Conversions and Modifications
Topic: New project 14ft Meyers V Hull
Replies: 83
Views: 22696

New project 14ft Meyers V Hull

Hello guys sorry it took so long I have been away The motor is a 9.9 Actually I sold Tina Tinner. To a very nice young man, its his first boat. I miss it but I really didnt like the tiller and wanted to upgrade to a side console. The boat was just too small for me as well. Last week I bought a 2001 ...
by perchjerker
05 Aug 2016, 12:40
Forum: Boat House
Topic: Are all portable fuel tanks crap now?
Replies: 39
Views: 6295

Are all portable fuel tanks crap now?

you can still buy old style replacement spouts on Amazon and other places and retrofit your can with them
by perchjerker
05 Aug 2016, 09:17
Forum: Motors
Topic: Cleaning an outboard powerhead
Replies: 16
Views: 5914

Cleaning an outboard powerhead

Do I spray the corrosion x on my powerhead after every trip which is near 4-5 times a week I fish so I'm constantly in salt. FWIW I have been boating for almost 50-years in saltwaters now ... and for many years my bros and I were running up to 13 OBs a season amonsgt us 4. Plus I run the boat dock ...
by perchjerker
04 Aug 2016, 14:51
Forum: Jon and V boat Conversions and Modifications
Topic: 1996 16' Lund Laker Project
Replies: 142
Views: 33933

1996 16' Lund Laker Project

grumpybear wrote:Hi .What did you use to remove the vinyl stickers (name,stripes) from your boat .I have tried a wire wheel .
heat gun works well
by perchjerker
04 Aug 2016, 10:01
Forum: Boat House
Topic: Need a good seat idea..
Replies: 22
Views: 1674

Re: Need a good seat idea..

Scott85 wrote:What type of hardware did you use to fasten the slider in place.


Sent from my iPhone using Tapatalk
it comes with mounting hardware. SS sheet metal screws, lots of them

I did have a mount like Dale pictured, to be honest it does not hold a candle to the GS Slider mount I have now
by perchjerker
04 Aug 2016, 07:36
Forum: Boat House
Topic: Need a good seat idea..
Replies: 22
Views: 1674

Need a good seat idea..

the slider will allow you to position the seat any where you want on the bench. Also its made of real heavy duty materials. I was impressed when I received it.

when you mentioned duck hunting I did not think about my setup because of the seat post, but it works the same without it
by perchjerker
04 Aug 2016, 07:10
Forum: Boat House
Topic: Need a good seat idea..
Replies: 22
Views: 1674

Need a good seat idea..

I have a slider and a short seat post. Its very comfortable if that is what you are after
20160611_172227.jpg
20160612_084830.jpg
by perchjerker
03 Aug 2016, 07:48
Forum: Trailers
Topic: New axle?
Replies: 5
Views: 919

New axle?

take a hammer and rap on the areas you suspect are bad.

if its solid it will give you that sharp tapping sound

if its a dull thud then its weak

I think its just fine
by perchjerker
02 Aug 2016, 16:18
Forum: Motors
Topic: Johnson 3 cyl 35 hp - Runs for while then dies
Replies: 30
Views: 2087

Johnson 3 cyl 35 hp - Runs for while then dies

rktman wrote:No offense intended pap, just have to spend money carefully on a 17 year old motor.
I really dislike the replace it and see what happens method but apparently there is no way to test the Electric eye sensor.
If you take Pappy's advice you ARE spending your money carefully
by perchjerker
02 Aug 2016, 16:03
Forum: Electrical
Topic: Circuit breaker for trolling motor
Replies: 17
Views: 1919

Circuit breaker for trolling motor

you don't need a breaker and a fuse they do the same job all you need is one or the other I have the fuse type and have an extra fuse in my boat. In all my years I have never ever blown that fuse if you are blowing that fuse then something is wrong. I understand what you are saying. I am not trying...
by perchjerker
02 Aug 2016, 08:51
Forum: Electrical
Topic: Circuit breaker for trolling motor
Replies: 17
Views: 1919

Circuit breaker for trolling motor

you don't need a breaker and a fuse

they do the same job all you need is one or the other

I have the fuse type and have an extra fuse in my boat. In all my years I have never ever blown that fuse

if you are blowing that fuse then something is wrong.
by perchjerker
02 Aug 2016, 08:26
Forum: Motors
Topic: Johnson 3 cyl 35 hp - Runs for while then dies
Replies: 30
Views: 2087

Johnson 3 cyl 35 hp - Runs for while then dies

rktman wrote:It seems odd the electric eye would be affected by heat, since its not a coil type device but I'll try anything at this point.
any electronic component can be affected by heat
by perchjerker
01 Aug 2016, 16:21
Forum: Motors
Topic: Going from a 40HP to a 50 HP outboard
Replies: 21
Views: 1668

Going from a 40HP to a 50 HP outboard

Thanks for the help. I am not sure of the rpm on the 50. I have the 40 on the boat now. The 50 is coming off another boat I am going to part out and I didn't have a tach on that boat. I guess I should just swap them and see where I end up. Then tweak it from there. I will let you know what I come u...