Search results

may just be my luck but i've tried on three different occasion to order from them and they also refer me to my local dealer. trying to walk them through which parts I need is always fun.

My jet pump bearing grease hose has hole in it, should i just order one from outboard jets or is there something I can buy at local part store that I can replace it with. I'd just order from outboard jets but they will not sell direct, at least they have never when i've called them before so...

Have you looked at the radios that can be installed in gauge hole or just drill a 4 inch hole for them? I put one of them on my boat and take up alot less room, and seem to pretty water proof and doesnt need a cover like the others. i've got two speakers on mine and that is a plenty loud enough...

I put the boat buckle ones on my boat couple years ago, still working good as of now.

yea that be easiest but always looking at options, the jet doesn't like the open water of the lake and burns more fuel. only need the jet at most 2 months of the time I'm fishing. one more question is it possible to put a 25 inch shft prop lower unit on a motor that a 20 inch shaft jet? that...

I don't even know if this is possible, just checking to see if somebody has ever tried to do this? Probably will be giving Yamaha a call soon to see if they can help. I was looking at putting a prop on motor during spring fall when water is higher. My only issue is its a factory jet so I its...

are you looking for new or used? got a lowarance lms 522c that i just took off my boat, works great just upgraded. PM if interested

perforated aluminum floor is what i've got also but I think it would be a little late for that option. water and dirt just go throught it and to bottom of boat and come out drain plug. i've got my front deck painted durabak and its not very hot. is aluminum up under and its painted a sand color...

I"ve seen those mag mounts, be nice it would work through a boat transom but that is alot to ask. Could use the bolt on one but would defeat purpose as many holes as got to drill so i'm going to use cutting board material i think. That way have plenty of room for adjustment. Just hope these new...

Got a new side imaging depth finder, after reading instructions and watching some install videos I am worried that a side imaging unit may not work with my jet. They say there should be nothing blocking to left or right or transducer, also show mounting transducer not on the bottom of the boat...

mainly river fish with an occasional lake trip but its not terrible out there. no option on moving weight back around as gas tank is mounted under deck and nowhere in back to put batteries or bait tank. probably best to leave it like it is because i did some measuring and looks like only have...

got 18 ft boat with 115 motor and looking at float pods but looking for input on weight offset. already got boat setup with 18 gallon gas tank and 1 or 2 batteries under front deck, and 30 gallon bait tank close to front deck as possible. the back of boat only has motor and 1 battery. by adding...

they are welded. used to be a three piece contruction d/k if the same now, seen videos when i was looking at them. nice boat just like mentioned before there gas tank placement is questionable especially on the jets.

durabak is some good stuff, put it on my front deck of my boat about 8 years ago and still holding strong with no slip. cant find any that has peeled up. all about prep. its personal opinion but i love to just be able to wash it down and have it dry quick. with carpet you get it wet its there...

yea got a tunnel so center drain is out of picture. beavertail should not hurt performance but I d/k, if i were selling I'd say the same thing. i understand lower the better for performance. i'll be doing some more reasearch the 115 hp motor weight boat down right much, i've got gas, bait tank...

where did you get your pods from? may be overlooking it. i have talked with beavertail about install in this situation and they said it was ok to raise them up about an inch off the bottom of the boat and this would clear the drain plugs. my only other issue is finding somewhere to install my...

got a question for people that have installed these on a boat and didnt see any need for a new topic. my boat has the drain plugs in both corners of the boat where you would put the float pods, so i d/k if i would be able to put these on. i dont have a drain plug in the middle, just two on the...

https://www.amazon.com/DU-BRO-Fishing-Storage-System-4-Feet/dp/B00BK7OPT4/ref=redir_mobile_desktop?ie=UTF8&keywords=horizontal%20rod%20holder&pi=AC_SX236_SY340_QL65&qid=1473883635&ref_=mp_s_a_1_79&sr=8-79 have u looked at these. they come in 2 or 4 ft sections. or you can make up your setup...

I've got a blazer 1860 with 115/80 yamaha 2 stroke. i get about 31-32 mph out of it with 30 gallon bait tank and 18 gallon gas tank. i have an 01 model but they dont make them like this one anymore. they putting the seat and consoles with foam in them. ive got a complete open boat except for...

i've seen the berkley, i'd have to rig something up to make sure they stay in place. i like the other option, i'll be looking into it. I see they have a 2 ft option may be the way to go. thanks for the suggestions.