Search results

I got mine off eBay (with both 1" and 1 1/16" inner and outer bearings, inner seals & hub cover) from seller randpcarriages, 2 shipped for $88. You can get them from Eastern Marine, too: https://www.easternmarine.com/loadrite-short-hub-kit-bt-150a-1350-lb-1409-06 for $30.56 x 2 + shipping...

Got the short hubs greased up good and on (finally), so the old girl now has some new shoes! The winch on front no longer holds (as I found on an abbreviated trip through the neighborhood on the new tires!), so that'll be next. Then fixing the lights and getting the outboard running (even...

I had the same problem on the trailer I have under my StarCraft 14'. I had the all-in-one wheel/hub combo as well. When I went to put on new hubs, they were too long. A little investigation showed that there are 2 different spindle sizes...

After doing some research on this, I found that there is officially a "short spindle," and that's apparently what I have. I found the description @ https://blog.easternmarine.com/trailer-spindle-identification/. I thought I would share in case someone else runs into this same issue. Here's a...

Barefoot--I measured the smooth area where the bearings ride on the axle. I didn't include the inner seal lip area where it goes, nor the threaded area where the castle nut screws on. I don't have a good picture of it with me, but I can try to take one tonight if that might help you out...

Thank you for the suggestions!

Long time lurker, first time poster. I have a 14' StarCraft _____. It has a 1958 25hp Gale Buccaneer on the back of it. This thing has a history to it--my dad had this for 25-30 years, sold it to a friend of mine in the mid 90s, he traded it to his brother in the early 2000s, and his brother...