Search results

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. 8

    New Minn Kota with Heading Sensor - Install ?s

    I would install according to minn kotas instruction for best performance. 2 feet or more from TM. You are going to like spot lock!
  2. 8

    Adding A Second Motor

    I run Monark 1644F (rated 70 hp) with a 35 hp evinrude and a yamaha T9.9 hp on hp restricted lakes. I keep the 35 centered when operating the t9.9 . Add a motor tote.
  3. 8

    Military Battery Terminals- Questions

    Outboard cables are not connected as I always disconnect them after use. I installed clamps 3 years ago and had the same issue with negative terminal from outboard being to small for bolt. I drilled out terminal to fit bolt with no issues.
  4. 8

    Military Battery Terminals- Questions

    What! cheap replacement ends from the 70s lol. The terminal covers fit snuggly and yes the did not break the bank.
  5. 8

    Military Battery Terminals- Questions

    I used rubber post covers on threaded post.
  6. 8

    1 or 2 Batts for Starting and House?

    Dual purpose batteries are just that. Starting your outboard and powering your accessories using deep cycle technology. I never had a issue with my set up. 5 amp stater charge. If you are running numerous accessories all day then you might need a dedicated deep cycle house battery.
  7. 8

    1 or 2 Batts for Starting and House?

    I always start off with fully charged batteries before going out on the water. Iam fishing most of the time with the trolling motor and dephfinder turned on, so mostly short rides with outboard. When I get home the batteries are hooked back to the charger.
  8. 8

    1 or 2 Batts for Starting and House?

    1982 Evinrude 35 hp elcnd electric start. Stator output 5 amps. Accessories two helix dephfinders, Bilge pump, livewell pump, led lights, Bow and anchor lights, horn, compass heading sensor, ammeter and Usb charger. Group 34 dual purpose agm battery. I have had no issues with the battery so...
  9. 8

    Battery Boxes OR Trays?

  10. 8

    Battery Boxes OR Trays?

    I purchased an aluminum battery tray supporting two group 27 agm batteries from Bass Boat Technologies for $65.00. Iam very pleased with setup. I purchased an aluminum battery tray supporting two group 27 agm batteries from Bass Boat Technologies for $65.00. Iam very pleased with setup.
  11. 8

    Where are you purchasing your new Trolling Motors?

    Another option: I installed a aluminum tm quick release bracket MKA-16-03 for the terrova 80. Very easy to install. You can drill additional holes in base bracket if need be. Trolling Motor slides on and off base bracket easily.
  12. 8

    Trolling Motor Circuit Breakers - 60amp

    I used 6 gauge Ancor wire from battery to 60 amp breaker to trolling motor.
  13. 8

    Trolling Motor Selection - Volts, Thrust, and Shaft length

    I upgraded my monark 1644f bass boat with a minn kota terrova 24v 80lb 45 shaft us2 w/i-pilot+blue tooth. Yes it has boat scale. Boat originally came with byrd double eagle 12/24v 33lb . Boat with outboard, TM, batteries, accessories with two fisherman roughly 1100lbs . Iam extremely pleased...
  14. 8

    1980 monark capacity plate help.

    I have a 1980 Monark 16 ft 1644F bass boat which I am the original owner. The capacity plate reads Maximum Horsepowe 70. I hope this helps. Joe
Top