Search results

In addition to all these tips, I suggest getting some compressed air. Shoot it in the "pee" hole. It will clear out the mulched leaves and keep the motor running cool. I struggled for years until figuring some of this out. Been wanting to design some kind of grate with a handle to run in the...

Long story but... When new control cable installed, I can't lift the idle/throttle lever and get the ignition to turn over. Is there a way to bypass this " safety" feature?

I know my starter is still turning over. It acts as if the kill switch has engaged. I'm chalking that up to all the melted bare wires. Thanks for your input.

What could cause the harness from the contoller/ignition to my merc outboard to melt and basically burn up? This happened one other time due to loose terminal connections but they were tight. Anything helps? What Amp in-line fuse could I use to keep this from happening with a new harness...

I read the articles and they are well written and informative. Based on the information, I will be running my boat until it is dead while saving my hard earned money to buy a rig like the one you are currently running. I will also try to spend more time with experienced jet boaters to get...

Frustrated! 2004 mercury 65jet which has a 90hp 3 cylinder head. Idles fine. Starts fine. When I throttle up, I'm losing power and rpms. Had the motor checked out by mechanic who says it runs fine. Well, he ran it in a tub and not on the open water. Compression and spark fine. It has nothing...

Mac That is a great pic. I tried to use those "wings" and they lasted about 1 day. Do you just have the splash guard riveted with some marine sealant?

I'm sure you jet heads have tossed this topic around but I haven't been able to find a post on it. Let's talk... Outboard jet 2stroke Outboard jet 4stroke Inboard jet (ie merc sport jet) better efficiency of the inboard however they never discuss the weight. How does the weight of a nice...

Looks great. Interested to hear how it runs. Draft and speed. Do you run the Susquehanna? I'm headed to the susky for first time in nov to fish/camp. I'm a little nervous about navigating that river.

Outboard jets.com

The beach chair is a dilemma. I'll need to price out the throttle and shift cables. I have a significant amount of electrical coiled up. I just like the idea of being upfront for better visibility.

Thanks guys. I called and ordered 9 grates and the pins for about $55 delivered.

I'm trying to order new pins and grates for my 2004 merc 65jet. I haven't been able to get what I need because they are part of the foot assembly. Any suggestions?

If anyone is still looing at this original post... what would I need to buy to move my console further forward? A longer steering cable, throttle and whatever the cable is that moves to F&R. Any suggestions???

All these guys are right on the money. When you are running it, I'd suggest doing some figure 8 to creat some chop. You want to see of it's going to cavitate. I feel your pain bc sometimes one hole is too much. Looking forward to hearing how it performs tomorrow. Good Luck.

I agree with dhoganjr it does look low but the pic doesnt show enough of the hull. I had similar issues and had to do a bunch of measuring and math. I ended up with a motor mount to help fine tune the height. I also considered a jackplate. Depending on the water conditions, you could adjust...

I have a center console polarkraft 1896 with a merc 65jet. The beam width is critical with the cc otherwise, you would have difficulty getting around the boat. I would like to move the console to the front but that probably won't happen. Most of the guys on here are always tLking about...

Evenhough I have 10 years of jet boating experience, I have only ran my jet on the allegheny north of I80. I'm looking for any advise on fishing/navigating the Susquehanna this fall. I've seen some YouTube videos of running shallows on the susky. I have to admit, those guys have bigger 00...

Hello Guys. There is a wealth of information on this site. I have watched boats being constructed and its is amazing your skills. Here is my question... I would like to buy a jet-ski or jet-boat like a sea-doo. rather than building a boat from the ground up,WHY COULDN'T A HULL BE MANUFACTURED...

Hello All, Here is an update on my trim failure. Mercury supplied a new pump assembly but I had to pay the labor. Bob Warren Boat Sales in Butler PA did the work. He deals alot with Jet Boats being close to the Allegheny where we all run ours. He had never seen this type of failure until...