Search results

hi i am trying to paint my motor. its a 9,9 evinrude what kind of paint do i use to paint the aluminum? it has to withstand heat n stick t aluminum but at same time it needs to match the hood and stick to fiberglass any ideas>?

Ive heard of using 3m5200 sealant on leaky rivets.the local marina told me they use it all the time and it works great. I can't really pinpoint where the leaks are coming from but I know it s along the keel and some random rivets. He told me to use a caulk gun and just seal all rivets and along...

Haha no problem take any ideas ya want. You can also give ideas if you have any. I get new ideas everyday for these things I wish I had a bunch of them to build differently from one another. Lol.

ok sounds like you know your boat motors! i am sorry about my questions just tryin to learn. i am gonna replace waterpump and housing also may replace thermostat and fuel pump if you think that should be done also. total should be around $55-80 for all. i know a rebuild kit is much cheaper then...

sounds like a lot of work so imgona try a wire wheel on my drill. i think it should clean it pretty good. i did notce a film betweem the keel an hull. possibly a plastic like seal for betwen metal? i will clean bottom and post pics. anyone know what kind of rivets and gun should i use?

ya i did remove the plug on top of carb. cleaned every port i found repaced all parts that came in the kit. as far as the "shaft" i was talking about that hole you described as the relief hole. so does that indicate it is pumping water or would it do that regaurdless?

her is a bunch of pics of my boat. 1st steps... :seal leaky rivets on keel and floor. :get 9.9 evinrude running properly (not pumpin water out pee hole) and runs but quits rebuilt carb. https://i1143.photobucket.com/albums/n633/LUKELONA/027.jpg...

so it is pumping water??? is that why it comes outta shaft? the fuel line is from my johnson 6hp i use all the time. also seen some junk in the 90 elbow but i cant unscrew it because it hits the case see link for elbow: [url]https://i1143.photobucket.com/albums/n633/LUKELONA/015.jpg[/url im...

ok thanks for the input. ya i did not do the horrible paint job on bottom boat is in great shape. no dents or holes. so i guess my new plan is to re-rivet the keel. how should i do this? regular rivets and hand gun ok? do i drill out old rivets then replace with new. will the leaks stop or still...

sorry about the caps. can i take the thermo out and put it bac together to see if it pumps water? also pee hole discnnected i can blow through it. it looks like the90 deg elbow may have some gunk in it. i just got the motor on trade. looks to have low hours. i rebuilt the carb. it runs but bogs...

how much does th steelflex cost? what do you need for tools and supplies. how is it applied? where can i buy it in person

is cabelas a store or online only? also whe ifilled with water it was hard to tell exactly what was leaking just beaded up in center

where do i buy it at? never heard of it until a week ago.also how do i replace the rivets? you think it will be tight enough to not leak?

MY JON IS LEAKIN PRETTY GOOD. I GET ABOUT 6 IN OF WATER IN THE BACK. I SEALED IT WITH FLEXIBL SLICONE FAST DRYING. NEXT TIME OUT LEAKED WORSE THEN BEFORE. SEALANT IS PEELING OFF LEAVING GAP BETWEEN METALS. WHAT IS A CHEAP WAY TO SEAL THIS WITHOUT LEAKS AND NOT CAUSING DRAG.? HERE IS PICS AT...

WHATDO YOU MEAN BY VACCUM LEAK? A AUTO TECH ONLY KNOW BASIC SMALL MOTORS. DID YOU SE THE WATER COMING OUT OF THE SHAFT? IS THAT NORMAL?

O OK SORRY ILL TRY AGAIN LOL TRY HIS LINK https://i1143.photobucket.com/albums/n633/LUKELONA/005.jpg

link to pics ad a video of motor runnin. its the blue motor in album. https://s1143.photobucket.com/albums/n633/LUKELONA/?action=view&current=001.mp4

got a link to work but still couldnt upload by clicking img. said it couldnt determine size??

:D ithink i figured out the pics. here is alink to photobucket bunch of pics give feedback please https://i1143.photobucket.com/albums/n633/LUKELONA/005.jpg

cool i just signed up. i am posting link with pics and a video of my evinrude 9.9 that doesnt pump water and wont run right. need help with it too!. :oops: