Search results

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    Good Compression

    thanks turbotodd..I'll check valve clearance too..changed plugs still no good fire/spark gonna work on the points and condenser..my friend that is helping me ...well he has been tied up a lot so maybe he'll be able to help me more after Sept.again thanks for the help.
  2. N

    Good Compression

    guess what guys...i started tinkerin with this honda again and found some points and condenser :o...did'nt have a clue ..well i'll keep yuns posted...
  3. N

    Wired2Fish T-Shirt Giveaway

    i'm in... yoohoo
  4. N

    Good Compression

    Ok..i cheked the plugwires and swapped them.still doesn't hit..so i'm still trying...thanks guys for the help ..
  5. N

    Good Compression

    i hear Johny..when i get all this figured out I'll post plenty of pics.prolly gonna be a winter project.i just got a 9.9 merc running good so i got a lot fishin/huntin to do till then :D
  6. N

    Good Compression

    Ok if the walls are still good and i can get by with a good honing ,then what, get some over size rings.surely that should'nt be too expensive..
  7. N

    Thermostat Question

    thanks nomo...that's a great idea using a cordless drill, I'll remember that.
  8. N

    Good Compression

    i hear ya Johny..i,'m gonna do it myself ..have a machine shop bore it out, idk whats the norm 30 over.buy new rings/pistons i guess lap the valves kinda like rebuilding a go cart/lawn mower motor sound like a good challenge to me unless it to expensive.
  9. N

    Good Compression

    K..i never thought about the plugs wires being crossed.thanks I'll check that and get back to ya.. i wonder how much would it would cost to rebuild this motor..prolly more than its worth.idk
  10. N

    Good Compression

    im sorry this is a B 7.5 hp Honda.the decal says B75,,my apologies for not wording my post a lil clearer..
  11. N

    Good Compression

    i hear ya,we checked the compression and it had like 60/65 this may be the problem..i know what you are talkin bout Shawn ...this motor is immaculate but it wont hit a lick :cry:
  12. N

    Good Compression

    I have a B-75 Honda 4 stroke that will not crank I can't get it to even hit a little by spraying carb cleaner directly into the cylinder or into the carb.it's getting a good spark on both plugs so my only conclusion is low compression.My question is, what is good enough compression to crank and...
  13. N

    Thermostat Question

    I got it guys...i completely missed the the tube in the housing upon reassembly thanks so much for the info ..
  14. N

    Thermostat Question

    The more i think about it, thats prolly what i done ..missed the tube inside.I'll get after it this evening and let ya know..thanks
  15. N

    Thermostat Question

    Thanks guys for the info..the discharge is after the stat,it is a 1991,lookin down the driveshaft and with the foot in my lap and turning the driveshaft and impeller clockwise while putting the impeller into the pump housing.also have it in a barrel cause the pick-up is on the bottom of the...
  16. N

    Thermostat Question

    I installed a new impeller/water pump in a 9.9 merc,looking down the shaft in a clockwise direction..it will not pump water out the discharge tube, there is no obstruction in the discharge tube,so i thought maybe the thermostat was stuck shut,so i took it out sprayed some deep creep on it and...
  17. N

    what year ?

    yep i look at the pic...i think it's 92....thanks
  18. N

    what year ?

    alright guys here's what i got..sr# ODO88O_ _ _ ,,ok that's 9 digits, im unable to find any sr# that's starts with a zero or the letter 0..however I did find a sr# that started the the letter D. So I think it is a 1992 year model but not positive..any thoughts would be greatly appreciated
  19. N

    what year ?

    Thanks guys..I'm lookin
  20. N

    New Member Introductions!

    hello everybody ...I'm located in western N.C. I've been lurking and reading this site for a long time .. I live real close to a river that holds some very big muskies.. aka (water wolf)and I got me a 1444 tin not sure who made it but I'm ready to use it.. been working on it and the trailer...
Top