***14ft. Mirrocraft build / modification thread***

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

walleyety

New member
Joined
May 11, 2013
Messages
2
Reaction score
0
Location
Milwuakee, Wi.
Hello all, been reading and viewing others modification threads and I decided to share mine and my dad's project. My dad got this boat from his father (my grandfather) and it sat behind his shed for a year or so. Now we decided to give this thing a new look and get it back in the water.
Gonna be a boat used primarily for fishing multi-species and dinking around on the water.

It is a 1980's 14' Mirrocraft resort etc.

First step was to clean out the leaves and junk and pull off the existing junk we no longer need / want on it.
946146_10151961151004418_1474202148_n.jpg


992828_10151961151009418_1784896401_n.jpg


425267_10151961151014418_2033590922_n.jpg



Then we started getting the bad paint stripped off.
601737_10151961151054418_1402070051_n.jpg


970639_10151961151074418_2032152632_n.jpg


The end product should be a casting deck on the bow with storage compartment and swivel seat. A deck over the splash well / fuel storage area. Rod storage along both sides. And a flat floor between the two existing benches. Carpet up to the rails. Fresh dark blue paint along the sides with a bare aluminum bottom. Going to add a 20 horse something or other to push her around, bow mount and a few other goodies.


I'll post updates as they come along.

Any comments, insight or ideas are much appreciated.
 
Nice work!! Its a lot of work getting it to nothing like that, I know!!! Very nice looking tin. Keep it up!
 
Top