TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
1966 Evinrude 9.5 low power
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Shaugh" data-source="post: 449308" data-attributes="member: 19781"><p>A ton of gunk is probably the clue.... If you're sure the float is adjusted and functioning then your likely problem is some gunk in the high speed jet.... If you don't want to disassemble the carb until you get the kit, you can try just screwing the plug out and spraying carb cleaner into the orifice. </p><p></p><p>When you do the carb kit pay special attention to that area.....</p><p></p><p>Here's the diagram:</p><p></p><p>https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1966&hp=9.5&model=9622A&manufacturer=Evinrude&section=Carburetor+Group</p><p></p><p>unscrew #77 and flush out that orifice...</p></blockquote><p></p>
[QUOTE="Shaugh, post: 449308, member: 19781"] A ton of gunk is probably the clue.... If you're sure the float is adjusted and functioning then your likely problem is some gunk in the high speed jet.... If you don't want to disassemble the carb until you get the kit, you can try just screwing the plug out and spraying carb cleaner into the orifice. When you do the carb kit pay special attention to that area..... Here's the diagram: https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1966&hp=9.5&model=9622A&manufacturer=Evinrude§ion=Carburetor+Group unscrew #77 and flush out that orifice... [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
1966 Evinrude 9.5 low power
Top