TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
1966 Evinrude 9.5 low power
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="samuelh1987" data-source="post: 449439" data-attributes="member: 21854"><p>Thanks for all the help, I let the engine soak overnight and cranked it over a bunch this morning to clean out the cylinders, a ton of black goo shot out of it and filled up the test bucket, lol. I've also ordered a new fuel pump after discovering that mine had a cracked leg, and ordered the missing high speed orifice plug for the carb. I did the compression test this morning without the fuel pump, and carb attached don't know if that will effect my numbers but only gained a few psi on each cylinder, With a bit of luck all of this will help it out. Motor was free with the boat so I don't mind to spend a little bit. If none of this helps I'll sell it for parts and find something else.</p></blockquote><p></p>
[QUOTE="samuelh1987, post: 449439, member: 21854"] Thanks for all the help, I let the engine soak overnight and cranked it over a bunch this morning to clean out the cylinders, a ton of black goo shot out of it and filled up the test bucket, lol. I've also ordered a new fuel pump after discovering that mine had a cracked leg, and ordered the missing high speed orifice plug for the carb. I did the compression test this morning without the fuel pump, and carb attached don't know if that will effect my numbers but only gained a few psi on each cylinder, With a bit of luck all of this will help it out. Motor was free with the boat so I don't mind to spend a little bit. If none of this helps I'll sell it for parts and find something else. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
1966 Evinrude 9.5 low power
Top