TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
1985 Smoker Craft Big Fisherman 14'
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="LDUBS" data-source="post: 454138" data-attributes="member: 21536"><p>Not at all. My explanations often assume you can read my mind - Haha. </p><p></p><p>Because your floor is greater than 48" x 96" you will have to use more than one piece of ply and will have some seams (where the edges of the ply meet). Instead of running a seam down the middle from front to back, run them across the boat from side to side. If you need 12' of floor that is over 4' wide then you would have two seams running across the boat from one side to the other. That is how it was done on my boat by the mfg. In my case the floors are covered in vinyl. Hope that makes better sense.</p></blockquote><p></p>
[QUOTE="LDUBS, post: 454138, member: 21536"] Not at all. My explanations often assume you can read my mind - Haha. Because your floor is greater than 48" x 96" you will have to use more than one piece of ply and will have some seams (where the edges of the ply meet). Instead of running a seam down the middle from front to back, run them across the boat from side to side. If you need 12' of floor that is over 4' wide then you would have two seams running across the boat from one side to the other. That is how it was done on my boat by the mfg. In my case the floors are covered in vinyl. Hope that makes better sense. [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
1985 Smoker Craft Big Fisherman 14'
Top