TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
1987 gregor baja special rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Joshyouwa" data-source="post: 415223" data-attributes="member: 18265"><p>I used all stainless hardware. I also sealed the wood with three coats of finish. Overall im pretty happy with my first transom replacement. Learned alot here and I thank you guys for that. Should hold up I hope but time will tell.</p><p>As far as getting it in... I copied what I took out. Made a template. And bent it in. I used the downs to the front of the boat to out pressure on the knew braces and used a rubber mallet to get the wood to slide down until I cleared the corner brackets.. No cutting needed at all. </p><p></p><p>Here is the finished product minus two bolts. </p><p></p><p>Sent from my LG-H631 using Tapatalk</p></blockquote><p></p>
[QUOTE="Joshyouwa, post: 415223, member: 18265"] I used all stainless hardware. I also sealed the wood with three coats of finish. Overall im pretty happy with my first transom replacement. Learned alot here and I thank you guys for that. Should hold up I hope but time will tell. As far as getting it in... I copied what I took out. Made a template. And bent it in. I used the downs to the front of the boat to out pressure on the knew braces and used a rubber mallet to get the wood to slide down until I cleared the corner brackets.. No cutting needed at all. Here is the finished product minus two bolts. [ATTACH type="full" alt="20160609_131830.jpg"]0[/ATTACH] Sent from my LG-H631 using Tapatalk [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
1987 gregor baja special rebuild
Top