TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
1993 25hp Evinrude electric start -missing linkage cable?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="MDCrappie" data-source="post: 320027" data-attributes="member: 160"><p>In first pic there is a straight blade screw just below your thumb(?). The plastic block to the rear of it should contact that screw and push it forward as the throttle is advanced.</p><p></p><p>In the 2nd pic the piece you are touching has a piece of white nylon on the right ride of it. (In pic you can see it if you look between your finger and the starter, just under the flywheel) The rod that the screw is attached to is also attached to this nylon piece. When the rod goes forward it is supposed to push that nylon piece forward causing the black piece you are touching to rotate and open the throttle. </p><p></p><p></p><p></p><p>From your pics it looks as though everything is there</p></blockquote><p></p>
[QUOTE="MDCrappie, post: 320027, member: 160"] In first pic there is a straight blade screw just below your thumb(?). The plastic block to the rear of it should contact that screw and push it forward as the throttle is advanced. In the 2nd pic the piece you are touching has a piece of white nylon on the right ride of it. (In pic you can see it if you look between your finger and the starter, just under the flywheel) The rod that the screw is attached to is also attached to this nylon piece. When the rod goes forward it is supposed to push that nylon piece forward causing the black piece you are touching to rotate and open the throttle. From your pics it looks as though everything is there [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
1993 25hp Evinrude electric start -missing linkage cable?
Top