TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
30 Hp carb on a 25 Hp Evinrude
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="marcus123.11" data-source="post: 229311" data-attributes="member: 7152"><p>:lol: im not sure if im in the correct place to talk about evinrude 35 hp 1977 ,i have a modified unit it has boysen reeds ,53mm exhaust outlet in the leg above the cavplat rejet carb and a fully lightend and ballanced crank and flywheel head skimmed to put compession at 160 psi its on a 14.6ft light weight deep v concorde fiesta speed boat v light boat i run a 10x13 alloy prop pollished on one side only at wot its revving sweetly at 7000rpm and sounds realy great when exhaust port is out of the water and nice and quiet when just moving around slow i have had it rev to 8500 when it jumped out of the water i know they used to race these engines so power to weight is why i did this mod , i would like to fit 40 carb but dont know any one who has done this ??</p></blockquote><p></p>
[QUOTE="marcus123.11, post: 229311, member: 7152"] :lol: im not sure if im in the correct place to talk about evinrude 35 hp 1977 ,i have a modified unit it has boysen reeds ,53mm exhaust outlet in the leg above the cavplat rejet carb and a fully lightend and ballanced crank and flywheel head skimmed to put compession at 160 psi its on a 14.6ft light weight deep v concorde fiesta speed boat v light boat i run a 10x13 alloy prop pollished on one side only at wot its revving sweetly at 7000rpm and sounds realy great when exhaust port is out of the water and nice and quiet when just moving around slow i have had it rev to 8500 when it jumped out of the water i know they used to race these engines so power to weight is why i did this mod , i would like to fit 40 carb but dont know any one who has done this ?? [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
30 Hp carb on a 25 Hp Evinrude
Top