TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
3m 5200 how to use?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="TNtroller" data-source="post: 372400" data-attributes="member: 4251"><p>Drill the bolt holes a bit oversize and fill the hole with 5200, use a pencil or something to spread the 5200 all around the outer edge of the hole evenly. Tape up the threaded end of the bolt so the 5200 doesn't cover the threads, push the bolt thru, but before you seat the bolt, put a ring of 5200 around the washer then seat the bolt, remove the tape and tighten it down. I think I read where to not tighten the bolt down all the way at first, the 5200 needs to cure a bit 1st, then when cured (7 days) finish it off. google it and you'll get several different/similar hits on using the stuff.</p></blockquote><p></p>
[QUOTE="TNtroller, post: 372400, member: 4251"] Drill the bolt holes a bit oversize and fill the hole with 5200, use a pencil or something to spread the 5200 all around the outer edge of the hole evenly. Tape up the threaded end of the bolt so the 5200 doesn't cover the threads, push the bolt thru, but before you seat the bolt, put a ring of 5200 around the washer then seat the bolt, remove the tape and tighten it down. I think I read where to not tighten the bolt down all the way at first, the 5200 needs to cure a bit 1st, then when cured (7 days) finish it off. google it and you'll get several different/similar hits on using the stuff. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
3m 5200 how to use?
Top