TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
everything steelflex
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="medicman619" data-source="post: 261526" data-attributes="member: 4744"><p>Thanks! I bought one gallon. (1/2 gal of neutral, and 1/2 gal of hardener) I did two coats, but in hindsight the first coat was too thick. I have less than a pint left over. Depending on your boat, I would definitely buy more than a gallon if you wanted to continue up the side. I would also advise to do each side separetely after the bottom had cured (4 days). I would not try to apply this stuff on a vertical surface. Tilt the boat. So ideally, you would have about 12 days total with dry time. 4 days for the bottom and 4 days for each side.</p></blockquote><p></p>
[QUOTE="medicman619, post: 261526, member: 4744"] Thanks! I bought one gallon. (1/2 gal of neutral, and 1/2 gal of hardener) I did two coats, but in hindsight the first coat was too thick. I have less than a pint left over. Depending on your boat, I would definitely buy more than a gallon if you wanted to continue up the side. I would also advise to do each side separetely after the bottom had cured (4 days). I would not try to apply this stuff on a vertical surface. Tilt the boat. So ideally, you would have about 12 days total with dry time. 4 days for the bottom and 4 days for each side. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
everything steelflex
Top