TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
evinrude 9,9 needs paint**help! i need ideas of what paint
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="atuck593" data-source="post: 224822" data-attributes="member: 4904"><p>I think it all depends upon how much you would like to spend and how much experience you have. I was on a budget with little experience and when I repainted my motor i sanded down all the loose and rough paint to the aluminum and fiberglass. I then used several coats of a self etching primer on the outside of the motor for a base. For my top coat of paint i was worried about heat but it really never ran hot enough to discolor the paint. However, I still used an engine enamel that was meant for car motors from the local auto part store just to be safe. It was around $5 a can. I have pictures on my build if it helps and I had little experience before I started. Hope this helps.</p></blockquote><p></p>
[QUOTE="atuck593, post: 224822, member: 4904"] I think it all depends upon how much you would like to spend and how much experience you have. I was on a budget with little experience and when I repainted my motor i sanded down all the loose and rough paint to the aluminum and fiberglass. I then used several coats of a self etching primer on the outside of the motor for a base. For my top coat of paint i was worried about heat but it really never ran hot enough to discolor the paint. However, I still used an engine enamel that was meant for car motors from the local auto part store just to be safe. It was around $5 a can. I have pictures on my build if it helps and I had little experience before I started. Hope this helps. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
evinrude 9,9 needs paint**help! i need ideas of what paint
Top