TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Fuel problems with 92 Evinrude 25hp Help Please!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Lil&#039; Blue Rude" data-source="post: 234939" data-attributes="member: 4627"><p>Probably a stopped up main jet or a bad fuel pump. Main jets in the bottom of the bowl behind the brass screw. Be careful if you try to remove it because alot of times they stick in there. I like to take a torch to the area the jet is seated in to free up the jet. Be careful not to burn anything down with the left over gas and all. Make sure you have a screw driver that fits the jet nicley also. I like to use torch cleaning wire or some kind of small diameter wire that will fit in the jet just to make sure there isn't any varnish reastricting flow.</p><p>Good luck.</p></blockquote><p></p>
[QUOTE="Lil' Blue Rude, post: 234939, member: 4627"] Probably a stopped up main jet or a bad fuel pump. Main jets in the bottom of the bowl behind the brass screw. Be careful if you try to remove it because alot of times they stick in there. I like to take a torch to the area the jet is seated in to free up the jet. Be careful not to burn anything down with the left over gas and all. Make sure you have a screw driver that fits the jet nicley also. I like to use torch cleaning wire or some kind of small diameter wire that will fit in the jet just to make sure there isn't any varnish reastricting flow. Good luck. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
Fuel problems with 92 Evinrude 25hp Help Please!
Top