TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Help with 1988 Johnson 25!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="overboard" data-source="post: 389782" data-attributes="member: 6547"><p>I find something interesting in your last post.</p><p>I have a "04" Johnson 9.9 that I followed the instructions from the manual for "link and sync." It would not idle when the throttle was turned all the way back to idle, it would stall. Also when I let off slightly on the throttle a WOT, it would run better. I tried to set it up as per instructions and no change. The roller was on the mark and everything was adjusted as per instructions; several times! </p><p>Decided WTH, and started playing with the linkage and got it to idle and run perfect. The linkage is now adjusted different than spec., and that's where it seems to work! ???????????</p><p>I have it on a 1654 FB Tracker GRIZZLEY, so when I'm running it it's definitely pushing a load.</p></blockquote><p></p>
[QUOTE="overboard, post: 389782, member: 6547"] I find something interesting in your last post. I have a "04" Johnson 9.9 that I followed the instructions from the manual for "link and sync." It would not idle when the throttle was turned all the way back to idle, it would stall. Also when I let off slightly on the throttle a WOT, it would run better. I tried to set it up as per instructions and no change. The roller was on the mark and everything was adjusted as per instructions; several times! Decided WTH, and started playing with the linkage and got it to idle and run perfect. The linkage is now adjusted different than spec., and that's where it seems to work! ??????????? I have it on a 1654 FB Tracker GRIZZLEY, so when I'm running it it's definitely pushing a load. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
Help with 1988 Johnson 25!!
Top