TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
How to Apply Ospho to Aluminum Boat Hull???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="minuteman62-64" data-source="post: 379404" data-attributes="member: 15157"><p>Did some test areas topside on the hull. See photo. Ospho application areas are under blue tape strips. Two areas on right were mechanically prepped, one with Scotchbrite buffing wheel and one with more aggressive paint stripping wheel. Area on far left had no mechanical prep.</p><p></p><p>Ospho took off the "flowers" on the area with no mechanical prep, but didn't seem to give the overall etching effect as on the areas with mechanical prep.</p><p></p><p>I will continue the remainder of the hull, in phases, with mechanical prep (buffing/wire brushing/sanding/etc.), followed by a wipe-down with denatured alcohol and then spray on Ospho.</p></blockquote><p></p>
[QUOTE="minuteman62-64, post: 379404, member: 15157"] Did some test areas topside on the hull. See photo. Ospho application areas are under blue tape strips. Two areas on right were mechanically prepped, one with Scotchbrite buffing wheel and one with more aggressive paint stripping wheel. Area on far left had no mechanical prep. Ospho took off the "flowers" on the area with no mechanical prep, but didn't seem to give the overall etching effect as on the areas with mechanical prep. I will continue the remainder of the hull, in phases, with mechanical prep (buffing/wire brushing/sanding/etc.), followed by a wipe-down with denatured alcohol and then spray on Ospho. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
How to Apply Ospho to Aluminum Boat Hull???
Top