TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Several small questions for jon boat project
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="BradHall" data-source="post: 171221" data-attributes="member: 4413"><p>My boat is a 36 inch at the bottom and 50 at the top and forteen feet long. I don't have any pics of the transom because I already pulled the wood out it was so rotten. I purchased some vinyl slides that go on the bunk boards at Bass Pro this weekend so I'll probably use regular wood on it and 3/4 by 3/4 for the transom to be safe since that would be stronger. As for the seat mounts I've seen the wise sure mount seat brackets that can pop rivet in place to the benches and I've been thinking about them but I can't find out how big they are like 1x2 on the edge or what because by boats benches have quite a bit of curve to them. I also looked at the springfield ones that wing nut down but I've heard that they pop off if you lean back to far and I'll be having my kid and dad in there with me sometimes and I'd hate for them to end up on the floor of the boat with a terrible headache.</p></blockquote><p></p>
[QUOTE="BradHall, post: 171221, member: 4413"] My boat is a 36 inch at the bottom and 50 at the top and forteen feet long. I don't have any pics of the transom because I already pulled the wood out it was so rotten. I purchased some vinyl slides that go on the bunk boards at Bass Pro this weekend so I'll probably use regular wood on it and 3/4 by 3/4 for the transom to be safe since that would be stronger. As for the seat mounts I've seen the wise sure mount seat brackets that can pop rivet in place to the benches and I've been thinking about them but I can't find out how big they are like 1x2 on the edge or what because by boats benches have quite a bit of curve to them. I also looked at the springfield ones that wing nut down but I've heard that they pop off if you lean back to far and I'll be having my kid and dad in there with me sometimes and I'd hate for them to end up on the floor of the boat with a terrible headache. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Several small questions for jon boat project
Top