TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Some questions on finishing my 14' mod v mod
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Macrosill" data-source="post: 429815" data-attributes="member: 11079"><p>I deconstructed the previously done wood framing after dragging the boat out of the garage into 30 degree weather with lots of wind.</p><p>I did some measuring and drawing. Based on some loose measurements I need 75 linear feet to do just the main floor and side lockers. Another 28 for the front casting deck. This is with keeping the front and rear benches.</p><p></p><p>That is aprox. 15 8' lengths. </p><p></p><p>I am going to remove the front and rear benches so I am going to have to add some more framing. I am going to add 50 % to the order and get 22 8' lengths. This should be enough I think.</p><p></p><p>The benches contain aprox. 16920 cu in of foam. To replace that I will need to add back aprox. 2.4 sheets of 4x8x1.5" foam.</p></blockquote><p></p>
[QUOTE="Macrosill, post: 429815, member: 11079"] I deconstructed the previously done wood framing after dragging the boat out of the garage into 30 degree weather with lots of wind. I did some measuring and drawing. Based on some loose measurements I need 75 linear feet to do just the main floor and side lockers. Another 28 for the front casting deck. This is with keeping the front and rear benches. That is aprox. 15 8' lengths. I am going to remove the front and rear benches so I am going to have to add some more framing. I am going to add 50 % to the order and get 22 8' lengths. This should be enough I think. The benches contain aprox. 16920 cu in of foam. To replace that I will need to add back aprox. 2.4 sheets of 4x8x1.5" foam. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Some questions on finishing my 14' mod v mod
Top