TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Starting 1st mod project/ need help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="cdfrye" data-source="post: 85336" data-attributes="member: 1480"><p>I am starting a modification project on my 14' v-hull. I have done some research and have bought materials. I got pressure treated 1/2" plywood for the floor. What I bought to seal the wood was Bondo fiberglass resin (recomended by the builder of the ODF{Olive Drab Floater} a well known mod project and a very helpful resource). I do not know if this the best way to go? I did not get the fiber glass fabric to lay in the resin as I am not patching the wood. I just want to get a good seal/ preservative on the wood as it is a floor. I intend to cover the wood w/ carpet, and also want to make sure the glue will not breakdown any sealer I use. :wink: Please help!</p></blockquote><p></p>
[QUOTE="cdfrye, post: 85336, member: 1480"] I am starting a modification project on my 14' v-hull. I have done some research and have bought materials. I got pressure treated 1/2" plywood for the floor. What I bought to seal the wood was Bondo fiberglass resin (recomended by the builder of the ODF{Olive Drab Floater} a well known mod project and a very helpful resource). I do not know if this the best way to go? I did not get the fiber glass fabric to lay in the resin as I am not patching the wood. I just want to get a good seal/ preservative on the wood as it is a floor. I intend to cover the wood w/ carpet, and also want to make sure the glue will not breakdown any sealer I use. :wink: Please help! [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Starting 1st mod project/ need help
Top