TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Jet Boats
General Jet Boat Discussions
Yamaha Jet pump all-stainless wear ring assembly
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="bellman" data-source="post: 401081" data-attributes="member: 20102"><p>You laugh, but a friend "helped" carry the rear of one of my skis with me to the water. I noticed it didn't seem right and found he had carried his end by the steering nozzle and had broken it <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown :(" loading="lazy" data-shortname=":(" /> I would SERIOUSLY add something very substantial to mount the pump mounts (front and rear) to. The long 6mm bolts are ONLY for holding the pump sections together. I would personally also make a ride plate under the entite pump that's an inch or two longer than the steering nozzle. A hard hit to the pump could knock the whole thing off and since the driveshaft is only connected to the motor with splines all you'd have to avoid losing that new pump would be your cables and cooling lines. Slightly off this, does the Solas pump have a 75mm hub? The OEM stator section has a 60 mm hub. The larger hub on the Skat C-75 mag pumps further helps the pump trade pressure for velocity.</p><p></p><p>Charles</p></blockquote><p></p>
[QUOTE="bellman, post: 401081, member: 20102"] You laugh, but a friend "helped" carry the rear of one of my skis with me to the water. I noticed it didn't seem right and found he had carried his end by the steering nozzle and had broken it :( I would SERIOUSLY add something very substantial to mount the pump mounts (front and rear) to. The long 6mm bolts are ONLY for holding the pump sections together. I would personally also make a ride plate under the entite pump that's an inch or two longer than the steering nozzle. A hard hit to the pump could knock the whole thing off and since the driveshaft is only connected to the motor with splines all you'd have to avoid losing that new pump would be your cables and cooling lines. Slightly off this, does the Solas pump have a 75mm hub? The OEM stator section has a 60 mm hub. The larger hub on the Skat C-75 mag pumps further helps the pump trade pressure for velocity. Charles [/QUOTE]
Verification
Post reply
Forums
Jet Boats
General Jet Boat Discussions
Yamaha Jet pump all-stainless wear ring assembly
Top