Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the running list of the current Sponsors. Help support TinBoats.net by supporting these guys first if you are shopping for similar products....
So I am in the middle of a “SeaArk Rescue “ rebuild and I have a full thread in the “Full Conversions” sub forums and all updates are videos and not...
Last post
Worked o it today. I have a name. Build thread in full conversion sub forum.
As I continue to plan out the build my next question is battery placement. The previous owner just cut a hole in one of the back benches and sunk a...
Last post
I like that....I'm not even sure I could get mine up to the front, even if I wanted to. I'd have to do some more measuring but I believe the position...
Need new plastic plate for my trolling motor plug. Need new aluminum screws for various stuff on the boat. Little things like that.
Where would I...
Last post
Guys, thanks for your replies to my stuff. I haven’t been ignoring, just a few things going on in the real, non-boating/fishing world.
I’ll be caught...
So picked off the caulking the previous owner had gooped on and found this gem. Just wondering what the suggested practice would be on filling these...
Last post
I had a boat with that problem. Seemed the previous owner couldn't decide where to mount the transducer. I just took a piece of cutting board type...
Hello everyone, I have a question for the gurus of tin boats.
I’m redoing the inside floor of my 1983 Monark because of some small pitting I found ....
Hey guys, I’m rebuilding a 16’ Starcraft Super Sport and I’ve got a question about sealing leaky rivets and seams while I have the boat upside down....
Last post
And the west system Epoxy works really well with a heat gun. It things out and creeps into where it needs to. I’m impressed so far. Just getting...
This is what I'm doing to my lake boat. I have a 1993 Sylvan Pro Select SC boat. Original owner. Purchased new in 95. I am replacing the 1995...
Last post
I ran twin 15 HP Evinrudes for 20 years without a problem. I'm on the water early and off the water before most people show up. A little common sense...
I'm rebuilding a 1999 Bass Tracker. During the tear down process, the floor was so rotted out that it practically fell apart as I was taking it out....
Last post
Appliance stores -- the delivery guys always have to get rid of the fridge boxes.
I always keep large pieces of cardboard around. Seems I always...
So that is a quick and bad drawing of my live well. Will that work? will it fill to the water line level? Will it empty thru the over flow? i plan on...
Last post
My Tracker is set up the same but it only has one livewell. The drain pipe has a Tee in it, but the lower port is plugged, so it's basically just a...
I recently acquired a 10' Ouachita jon. The original owner said he purchased it in the early 1960's. I'm trying to determine model and exact year of...
Last post
OK. Lots of views but no information on the boat. I've scoured the internet. My best guess is 1964 based on discussion with previous owner. I was...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum