Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the running list of the current Sponsors. Help support TinBoats.net by supporting these guys first if you are shopping for similar products....
It's about time to order some topside paint for my 1448 Alumacraft. I've been going round/round and obsessing to a ridiculous degree over this beater...
Last post
I have purchased the products, and awaiting for the 70° temperature needed for proper application. I have opened one of the cans to check out the...
Hello everyone, this is about my third thread since all this started. I found a Jon boat a while back to fix up and go fishing. I did the motor work...
Last post
Dale, do I keep cleaning the pits as I’ve been doing or use the vinegar and copper scrub now? I’ve tried vinegar to remove the white corrosion from...
I purchased plywood for my boat deck. And now I’m paranoid that I may have bought pressure treated wood. This is the only logo I can find. Can anyone...
Last post
For the same reason you don't want to use pressure treated lumber for the bunks on your trailer.
The chemicals used to treat the wood tends to react...
I traded an 8' foot Pelican Bass Raider for this boat and need some help identifying the brand, model etc. My dad seems to think it's an old Lowe...
Last post
I'll concede that, but the extra weight tends to hamper cornering capability. The additional horsepower, along with the suspension design and tuning,...
Hi folks,
Looking at a couple boats, one of which somehow had the entire gunwales removed. It's basically a standard 14' v-hull rowboat. It appears...
Last post
I'd try to get some thin wall aluminum pipe, 1 at least, maybe 1-1/2 and have a saw cut down it lengthwise through one wall. Then slip over the bare...
Currently working on a project boat. Aluminum 1996 Spectrum. Noticed this on the inside of my hull when I removed the pour foam. What’s the smartest...
Last post
Boy, that is the truth. Mrs Ldubs says I'm way beyond a simple scrub and rinse. :LOL2:
I’m beginning to look at new boats and I think it’s definitely going to be a tin boat with a slight V in it around 16 to 17 feet. I’m fishing inland...
I am acquiring an aluminum 1999 SeaArk 2472MV. It started its life as a rear center console then remade into a forward console striper boat at some...
Last post
Anything is better than nothing. The more material you can get alongside the better. The top strap will give lots of strength when the side wants to...
I got an old Grumman that needs the transom wood replaced. There is aluminum encasing the wood that is riveted to the hull on the sides and under the...
Last post
As said above, remove all rivets, including the end caps, and go for it. For re-assembling, consider the closed end pop rivets. I replaced 170 rivets...
So I have a 14’ boat that I use for fishing small ponds and I’d like to add swivel seats. Not sure I want to drill into my bench seats and I saw the...
Last post
dad's got a set of clamp-on's in his weldcraft.
I wouldn't use them.....
In fact, I'm headed to a dealer I used to work for on Tuesday, to pick up...
I'm nearly done stripping the bottom of my boat and soon I will be building the deck. Will update my build thread soon!
I'm trying to figure out if...
Last post
Just an idea. I’ve been researching paint textures and I think I’ve decided to add the “soft sand rubber” texture to my base coat by broadcasting it...
Never let a color blind guy order paint. I got Hunter Green from CABELas already mixed it and put some on the boat, seems way too dark. Is there any...
Last post
I’m no help just also frustrated with lack of choices of shades. Looking for a flat light tan or sand to paint the inside of mine to keep it cool and...
Hello folks. I am new on here. I was checking to see if anyone could help me I’d this boat. It doesn’t have any marking or is plates that I can find....
So I have the old wood I tore up as my guide pattern. It was 1/2 and is in good enough condition that I can at...
Last post
I should have replied to you before you posted! I saw this in a few other threads and was pretty sure you'd be the first guy to reply! Unfortunately...
My first boat was a 14 foot Ouachita jon boat with a Johnson 25. Can anyone tell me the thickness of that hull? I have searched all over the Internet...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum