Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the running list of the current Sponsors. Help support TinBoats.net by supporting these guys first if you are shopping for similar products....
Question about a new to me early 80s Evinrude 35 - 2 cyl. It just will not start without 2/3 to full throttle and will not idle well at all.
It had...
Last post
As has been said already......
Choke blade has to be completely shut. Not just close. Only way it will pull enough vacuum to get the fuel out of the...
My son bought a lowe 18' stinger with a 70hp Johnson(Suzuki) around a month ago...still hasmt had time to see if the motors good. The guy he bought...
Last post
Thought I'd do a follow up...Good news... got it going
Thanks for mentioning the vst ...the fuel that was in the tank i used in my lawn mower, didnt...
I'm heading out this afternoon to look at a 15' Duroboat with an Evinrude 28hp SPL from around 1988. I would much prefer a later model 4 stroke. The...
Last post
Here is a nice Duroboat discussion from way back on this site:
What do you guys do when you need a part that no one sells anymore? I'm looking for a 93878 retainer for a 2002 mercury 25hp 2 stroke.
Last post
Well I found one available at US boat works inc in Kansas. The bad news is I had to pay 50 bucks for a part that was normally under $10. And shipping...
Well, I ran aground on a sand bar and sucked a lot of sand into the motor, a 2003 Honda B15D. I've run it on the muffs and not gotten anywhere near...
Last post
I've flushed the motor through the t-stat hole. Got a lot of sand out, with best results by flushing until the system was full, then letting it drain...
where is the water discharge on a 1974 johnson 9.9 ? I don't see a pee stream coming out the bottom of the motor case, but it looks like maybe there...
Does anyone use a water separater for their engine and use a poratable tank with it? I don't think it would hurt my setup, I'm just wondering if it...
Last post
I was thinking about upgrading the separator. I do only run in freshwater though so I see your point.When I assembled it I was afraid of getting the...
Owner said motor ran 10 years ago before shutting down.. Have things to do before next year to run it. I would like to put on the boat to see how it...
Last post
There recommending marine gear oil or 80-90 gear oil from parts store. Recommendation?
It's also been suggested to hook up the proper fuel and see...
Hello again everyone. I’m back for more advice from the experts.
This also answered a previous post of mine with this experience.
I took my Monark...
Last post
Wow some scary stuff. I’m about 3 hours or so from any salt. Pull start the motor. I never leave my trolling battery in the boat. Or the one I run my...
I am picking up a 35 HP Johnson Seahorse made in the late 1950’s, looking at the pictures I assume it’s a 1957 or a 1958. I don’t know the condition...
Last post
Correct, but if everything up top looks like it did on the bottom end, I suspect they had been just replaced before it was stored. Plugs were very...
I just picked her up last weekend, and she looks to have low hours.
The first thing I did, was barrel test her, the water pump worked, telltale peed...
Last post
Thank you for your quick responses, ... and for your expertise in this matter.
If you think of anything else you believe I should know about this...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
