Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the running list of the current Sponsors. Help support TinBoats.net by supporting these guys first if you are shopping for similar products....
Any particular brand of tire covers you guys recommend for your boat trailer tires? I have 4.80-12 size tires, and that equals about 21 when mounted...
Last post
Dry Rot - The simple wood shield works!
Trailer Jacking - Lower tongue all the way you can, prop blocks under the rearmost support or frame, then...
I can't figure out how to attach the lights to the trailer. I went as far as opening one of the lights to see if there is a threaded hole in the back...
Last post
Thanks but that's not your burden. It woulda been nice had Wellmax provided better instructions. For future reference, you slide the head of the bolt...
I recently bought my first tin boat. On the trip home I noticed that the strakes (SP?) are contacting the wheel fenders, additionally the keel is...
Last post
I attached a pretty basic sketch of a typical trailer. My boat is supported by the two bunks and roller #1 which is under the bow stem of my boat. In...
My 14' Starcraft SF140 is the first boat I've had where the motor stays on during trailering. The guys who sold it to me said not to worry about the...
Last post
I'm one of those who doesn't have the ground clearance. 16' vee hull, 35hp 2 stroke. I trailer with the motor tilted up and use a ratchet straps from...
Saw this on a local fishing forum & thought I would share here. Owner says this one was actually in use for about 17 years.
Not the first time this...
Last post
The previous set up I had with the fold away was a relatively light boat/trailer. There is some slop in the hinge especially when you lose one of the...
was heading home from lake and noticed grease on front of one of my trailer wheels.hub was cool after 50 mile trip at highway speeds. grease came out...
Last post
or when the bearing buddy comes off completely like mine did last weekend.what a mess.
Relocated so new angle for backing up the boat is like a hard 90˚. Wouldn't be that bad except for the sprinkler head right there. I've thought about...
Last post
i was considering one until i aquired a brand new atv winch from a conversion on a piece of equipment at work that didn't end up happening. i mounted...
My 15ft Grumman can with what I can only imagine was at one point in time a jet ski trailer. It’s a tilt trailer that looks like someone extended the...
Last post
I extended the tongue on a similar trailer and it works just fine. The tongue weight difference would be negligible. In my case the trailer fit a 12’...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum