Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the running list of the current Sponsors. Help support TinBoats.net by supporting these guys first if you are shopping for similar products....
I have a mid 90s 200hp Mercury on a 2072 fisher. When the motor is off I can shift from N to F no problem. When the motor is at idle in N it will go...
Last post
I should be stopping by the boat today so I'll try to remember to check it.
I checked the motor today and the reverse gate has a little play but it...
I grease my jet after every time it has been submerged in water. I use 2-4-C with the little hand luber but I hate those toothpaste type grease...
Last post
I made a clamp of two 3/8 square aluminum rods, wide enough to go across tube w/ a bolt & wing nut on each end, loosen a bit and push up the tube and...
Currently running an Alumacraft MV 1860 w a 50hp Merc 4 stroke, Atlas Micro Jacker, Solas 11p Stainless. I see 32mph right now with this set up....
Last post
An 1860 will be fine with a115/80 unless the boat is a pig weight wise, it won't scream, but it should plane out just fine. The funny thing a lot of...
Got an 18’ Lund Jon. Tiller control. Gonna power it with a jet. How does Evinrude, Tahatsu, Mercury, Johnson and Yamaha 40 to 60 jets compare?
Thanks...
Last post
Does the boat have a tiller prop motor on it now? What size engine is on it? Usually you see 115/80 or 90/65 jets on 18ft boats but the 60/40 may...
It is surprising how little information that I can find about this engine. I'm considering putting it on a new build and I'm told that the difference...
Last post
The only differences in the 35 jet and the 40 jet are the stickers, price and programming. They are essentially the same engine. Mercury just...
I don't even know if this is possible, just checking to see if somebody has ever tried to do this? Probably will be giving Yamaha a call soon to see...
Last post
Agree totally with handyandy. Get a prop motor if that's what you use most of the time. Switching back and forth will get to be a PITA.
So I've got a 1993 20hp Johnson and I've come across a jet leg I should be able to pickup for under $500CAD, depending on condition. My current boat...
Last post
with a 180 lb boat, it should do just fine. the general suggestion is 25lbs per powerhead (not jet) horsepower
Hello guys. New to owning a jet outboard and I'm having a small issue and I hope I can get some input here. I bought a new blazer 1752 with a 60/40...
Last post
Agree, just knowing the basic ins and outs of the impeller, the liner, and the shimming process, is a big plus to a jet owner, pretty simple to do on...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
