Many don't know it, but the modern in-line black powdah rifles aren't anything new. They first appeared with flip-open breeches, similar to a Trapdoor Springfield, in the late 1700s. The 52-caliber Hall rifle pictured below was 1st patented in 1811 and was only delayed in adoption by the US military by the war of 1812.
It finally was officially adopted as the 1st breech-loading rifle ever issued to US troops in 1819, with the first models issued as flintlock ignition. It is a marvel of engineering! And truth be told, while Eli Whitney and the cotton gin get the public credit for interchangeable parts, it was the Hall rifle, and associated tooling as designed by the inventor John Hall, that should be properly credited with a production style for consistent tooling and gauging, so that parts were truly interchangeable. In fact, they took 100 different Hall rifles off the production line at Harpers Ferry and the Simeon North production facility ... took them apart ... and reassembled them with all different parts used in the assembly and EVERY rifle met the acceptance specs and criteria.
I've been wanting an original flintlock version for a LONG time, but I refuse to mortgage the house to do so. I saw this later percussion version on auction with low bids and I threw in a low bid and surprise - surprise - I won it! The shape it arrived in was much better than the auction pictures and description. To add more value, this model is only one of 4,000 produced, which makes it the most rare in regards to production model numbers. I could easily flip it and make a good $500 or twice that!
It is a breech loading 52-caliber rifle. As seen in the pictures, you flip open the lever in front of the trigger guard and the breech block opens. You put in the powder (82-grn and 100-grn service loads) then add a 0.525" (52-cal) roundball on top, close the action, put on a cap .. bring to full cock and fire away.
Some interesting features are:
* All interchangeable parts
* 1st issued breech loaded to a standing army
* Truly ambidextrous rifle, both lefties and righties can operate it. (Hammer is amidst the action, so the sights are actually off-set to the left by a good 1/4", not unlike the Bren machine gun of WW2).
* Has a screw adjustable sear to adjust the let-off from a hair trigger to a battle trigger
* Had a rate of fire twice that of muzzleloaders at that time (early 1800s)
* Accuracy was greater than muskets of that time, hitting 2X that of other arms on man-sized targets at 100-yards
The first 4 photos below are of the 1843 model I just stole ... and HECK YES I will shoot it! Yeah, it has some gas escape where the breech closes, not unlike a revolver ... but it is a hoot to shoot! ... and I resolve to have one someday in flintlock, then I will complete my collection of shootable black powdah arms from the handgonnes of 1500s to matchlocks, wheellocks, and flintlocks through the early 1800s.
It finally was officially adopted as the 1st breech-loading rifle ever issued to US troops in 1819, with the first models issued as flintlock ignition. It is a marvel of engineering! And truth be told, while Eli Whitney and the cotton gin get the public credit for interchangeable parts, it was the Hall rifle, and associated tooling as designed by the inventor John Hall, that should be properly credited with a production style for consistent tooling and gauging, so that parts were truly interchangeable. In fact, they took 100 different Hall rifles off the production line at Harpers Ferry and the Simeon North production facility ... took them apart ... and reassembled them with all different parts used in the assembly and EVERY rifle met the acceptance specs and criteria.
I've been wanting an original flintlock version for a LONG time, but I refuse to mortgage the house to do so. I saw this later percussion version on auction with low bids and I threw in a low bid and surprise - surprise - I won it! The shape it arrived in was much better than the auction pictures and description. To add more value, this model is only one of 4,000 produced, which makes it the most rare in regards to production model numbers. I could easily flip it and make a good $500 or twice that!
It is a breech loading 52-caliber rifle. As seen in the pictures, you flip open the lever in front of the trigger guard and the breech block opens. You put in the powder (82-grn and 100-grn service loads) then add a 0.525" (52-cal) roundball on top, close the action, put on a cap .. bring to full cock and fire away.
Some interesting features are:
* All interchangeable parts
* 1st issued breech loaded to a standing army
* Truly ambidextrous rifle, both lefties and righties can operate it. (Hammer is amidst the action, so the sights are actually off-set to the left by a good 1/4", not unlike the Bren machine gun of WW2).
* Has a screw adjustable sear to adjust the let-off from a hair trigger to a battle trigger
* Had a rate of fire twice that of muzzleloaders at that time (early 1800s)
* Accuracy was greater than muskets of that time, hitting 2X that of other arms on man-sized targets at 100-yards
The first 4 photos below are of the 1843 model I just stole ... and HECK YES I will shoot it! Yeah, it has some gas escape where the breech closes, not unlike a revolver ... but it is a hoot to shoot! ... and I resolve to have one someday in flintlock, then I will complete my collection of shootable black powdah arms from the handgonnes of 1500s to matchlocks, wheellocks, and flintlocks through the early 1800s.