hi guys, i want to modify a new vhull, but i cant really go over 13ft. If i get a rivited the weight capacities are to small, so i think i should get a vhull, from g3, lund, alumacraft,ect. do you have any suggestions? i want to modify it with a big front and back casting deck and storage compartmens.
TinBoats.net
The original aluminum boat site!
modifying a aluminum boat
- Thread starter basschamp
- Start date
Help Support TinBoats.net:
CarlF
Well-known member
If you want big raised decks, get the widest boat you can.
Smokercraft/Sylvan make some really nice 13' hulls in the Alaskan Series. They are the only 13' boats I have seen.
There are alot more 14' 'ers out there.
I dont know of too many 12' semi v's that will handle a high deck but maybe I am wrong.
Smokercraft/Sylvan make some really nice 13' hulls in the Alaskan Series. They are the only 13' boats I have seen.
There are alot more 14' 'ers out there.
I dont know of too many 12' semi v's that will handle a high deck but maybe I am wrong.
Nussy
Well-known member
Go as wide as you can and look for a square or reverse chine. They'll be much more stable than a more rounded chine.
