decking

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gizfawfish

Well-known member
Joined
Oct 6, 2009
Messages
65
Reaction score
0
I have a lowe 1236 riveted jon boat and was wanting to deck the gap between the front seat and middle bench. I was also wanting to know if there was a good decking material out there. But i am also on a budget. Does any one know of any seats and seat pedestals that are good. And then what type of material should I use to cover the ribs on the floor. Any suggestions help. THANKs
 
If it were me i wouldn't deck it unless you did something like Bufford did. My first mod was a 14-36 and I did what you are thinking about doing. lets just say that boat is gone and now i have a new mod project.

You should be able to find bufford's post. i will post it if you give a sec to find it. There is also a article on here talking about when and when not to deck a jon boat.

here you go. https://www.tinboats.net/forum/viewtopic.php?f=13&t=9912&hilit=bufford
 

Latest posts

Top