FABRICATING ALUMINUM BOW MOUNT PLATE

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FigureEight

Member
Joined
Jan 23, 2010
Messages
6
Reaction score
0
Location
Des Plaines, IL.
I RECENTLY BOUGHT A NEW TERROVA BOW MOUNT TROLLING MOTOR AND NEED TO INSTALL IT ON MY 14FT DEEP V. THERE IS NO DECK ON THE BOW YET FOR MOUNTING ANYTHING. IT LOOKS LIKE THE PREVIOUS OWNER USED A 2X4 BOLTED DOWN TO SECURE THEIR MOTOR. I WOULD LIKE TO GET A PIECE OF ALUMINUM AND USE THAT TO MOUNT THE MOTOR TO INSTEAD OF WOOD. IS THERE SOMEWHERE I CAN BUY ONE OR GET ONE MADE UP ? ANY IDEAS ?
 
You might want to check these guys out. www.akmccallum.com they are out of Fayetteville, NC, but I'm sure they will ship anywhere. All they do is jon boats. Otherwise just try a local metal fab shop, they should be able to hook you up. I'm going need to fab one myself once I get a bow mount trolling motor. Good luck
 
I recently bought one for my G3. Call Madisonville Marine at (423) 442-9344 and ask for Dave or Joe. I don't know where they get them but they are adjustable for height.
 

Latest posts

Top