Jack plate help

Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Usmctanker

Usmctanker

Well-known member
Joined
Aug 11, 2009
Messages
96
Reaction score
0
I am thinking about building a jack plate for my 85hp evinrude.
If I make it out of 3x3x3/8 6061-t6 aluminum would it be strong enough?
 
I am going to make one like this: https://www.tinboats.net/forum/viewtopic.php?f=3&t=10823

I am debating using aluminum plate vesus treated wood for the plate itself.
 
i didnt know if it would work with an 85hp motor or if i should buy a comercial built one.
 
Usmctanker said:
i didnt know if it would work with an 85hp motor or if i should buy a comercial built one.
Click to expand...
an 85hp has a lot of power home made may be taking chances
 
it comes down to the thickness of the material you make it out of..
here is the link to the pt35 power trim buy CMC marine.
you can see what they make it out of and judge for yourself
 

Similar threads

codebreak
Aluminum angle w/ 4lb foam backing
Replies
3
Views
1K
codebreak
codebreak
C
Trim and tilt vs Jack plate
Replies
2
Views
877
airshot
airshot
M
Cavitation Plate Lower Than Boat Bottom
Replies
10
Views
2K
Bailey Boat
B
S
20 HP Suzuki 4 stroke on 11' aluminum RIB, goes bow high on take off.
Replies
2
Views
584
Bailey Boat
B
W
Aluminum Plate for Transom
Replies
9
Views
3K
thill
thill

Latest posts

Top