My mini casting deck

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nuckinfutzracing

Active member
Joined
Jul 29, 2010
Messages
35
Reaction score
0
Hey guys, I've taken away a lot from you guys and thought I would contribute. The guy who ownedmy boat before me had floors already in it. They were rotting last year when I bought it so I replaced them them. The way he had it there was a lot of wasted space in the front. My new project was to pull that all out and make it better. I don't have any picsof how it was originally but here is my progress so far. Any input is welcomes, positive or negative:

Here is the framing

5528135304_7e44b89607.jpg


The box with batteries and charger installed

5528137938_b9744a819d.jpg


Here is the floor installed and the upper piece that the trolling motor is mounted to. I still need to do the carpet and make a hatch for the battery box. I also plan to make a hatch from the casting deck up to the upper piece for a little extra storage. Let me know if it looks like I went wrong some where. I'm gonna try to get it done before Thursday took Thurs and Friday off to hopefully take it out.

5528139030_1f7432177a.jpg
 
Nice. Just make sure to seal it all up good.
 

Latest posts

Top