jojo Well-known member Joined Mar 18, 2010 Messages 231 Reaction score 12 LOCATION Wisconsin May 29, 2011 #1 Is it ok to have the pedestal seat mount only bolted through 3/4" Plywood? Or does it have to be somehow mounted to the frame as well?
Is it ok to have the pedestal seat mount only bolted through 3/4" Plywood? Or does it have to be somehow mounted to the frame as well?
Captain Ahab Well-known member Joined Dec 12, 2006 Messages 10,511 Reaction score 1 Location Bucks Co., PA May 29, 2011 #2 I would mount it to the frame or, at very least add additional bracing. I mounted mine into some framing and sandwiched the plywood with diamond plate See:
I would mount it to the frame or, at very least add additional bracing. I mounted mine into some framing and sandwiched the plywood with diamond plate See:
S shawnfish Well-known member Joined Dec 17, 2010 Messages 924 Reaction score 0 Location OMAHA NE May 29, 2011 #3 i placed a peice of 1/16 aluminum that was twice the size of my pedastal base and then used steel anchors(like drywall screws that flange out as you tighten them) i got from home depot for 1.50 each and mines solid as a rock...
i placed a peice of 1/16 aluminum that was twice the size of my pedastal base and then used steel anchors(like drywall screws that flange out as you tighten them) i got from home depot for 1.50 each and mines solid as a rock...