Rhino liner or similar

Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
J

JerD

Member
Joined
Mar 16, 2011
Messages
11
Reaction score
0
I'm still working on my jon project. I don't want to use carpet. My plan is to use 1/2" plywood for the floor and front and rear decks. My intent is to seal the bottom of the wood with some sort of sealer and use something similar to the "cabelas" Tuff stuff paint on top. Will this seal and protect the wood?
 
Use regular exterior plywood NOT treated wood.....Seal the wood with a few coats of spar urethane. Make sure to pay extra attention to the edges and anywhere you make a cut. I used the Minwax brand "Helmsman" spar urethane in a spray can.

Let it dry good for a day or so, then put your non-skid stuff on top of that.
 
After the spar, should I still use the primer, or apply the paint directly after scuffing up the urethane. I'm leaning towards using the "tuffcoat" paint available at Cabela's.
 

Similar threads

Stimputello
Aluminum Rivet Questions Trimming and Rivet Tool
Replies
6
Views
665
thill
thill
Hook&Reel
14’ Jon
Replies
3
Views
1K
airshot
airshot
M
Transom Restoration on 99 Starcraft Superfisherman 176
Replies
14
Views
2K
thill
thill
sunnyg
Got my first boat! Could use advice on corrosion repairs.
Replies
9
Views
2K
michaelaskew
michaelaskew
fearthewopr
Fish Finder Mounting
Replies
12
Views
2K
airshot
airshot

Latest posts

Top