How is the G3 Eagle 145 PF

Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
hwew

hwew

Well-known member
Joined
Jul 5, 2009
Messages
190
Reaction score
0
Location
Land
I sold my Alumacraft Crappie Jon Jr. Because the boat was to unstable when walking around. I am looking at a G3 Eagle 145 PF to replace it. The bottom is 48 " wide. The bottom is 12" wider than the Jr. The boat weigh's aprox 100 lbs. more than the Jr.
Any input is welcome.

Thanks
 
I just went to a 1448 from a 1436 and the difference is night and day. Literally walk up to the edge without feeling like it will tip.. You will be happy. With a 15 4strk it will plane at 1/3 throttle, or with 3x people, two being over size. Good stuff.
 

Similar threads

W
Deciding between two boats, G3 185 VF and Alumacraft 185 Trophy
2 3 4
Replies
64
Views
4K
LDUBS
LDUBS
M
Buying a new Jon Boat and a few questions
Replies
7
Views
1K
cyclops2
C
J
Some recommendations and general thoughts on outfitting a tinboat
Replies
11
Views
2K
thill
thill
J
Beating the dead horse-with a prop
Replies
15
Views
2K
MrGiggles
M
S
Need boat purchase ideas
Replies
9
Views
1K
skipper123
S

Latest posts

Top