A couple questions?

I have a couple questions for yall.

Is there anyway I can get a new capacity plate?
Is there anywhere I can put in my hin number and find out the make and model?
And is there something that yall reccomend to fill holes that are above the water line?

I have found a few sites that will make the plates but you will need the info for them:

https://www.nmma.org/certification/products/labelsanddecals.aspx#plates

https://garzonstudio.com/boat/capacity-decal.html

https://www.a1engravingservice.com/Plastic-Tags.html

As far as using your HIN number, this will get you a little ways but not far:

https://boatspecs.iboats.com/

I'm having trouble finding anything at all on my boat which is a 14' Traveler by Sea Nymph...

How big are the holes in your boat? You can use closed end blind rivets for these holes. They're cheap, easy to use, and make for a professional looking fix.

https://www.youtube.com/watch?v=L0MA1-5NXjs&feature=related

They work above and below the waterline.

Thanks for the replies! Im gonna check those sites out. The holes are 3/8 and smaller so I was wondering if there was anything like a bondo or spackle.(which I would feel weird with both of those)

JB WELD 8)

ifish4redd said:

JB WELD 8)

Click to expand...

yup...

Yup. Jb weld is the best

Yup. Jb weld is the best

JB Weld is great stuff, I have filled holes with it and also repaired some nicks in my skag.