Gunnel Mount Rod Holders

Fiberglass Supply Depot
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

Badbagger

Well-known member
Joined
Mar 26, 2011
Messages
841
Reaction score
0
Location
Midway, FL
Who uses gunnel mounted rod holders? Gimme the good, the bad and the UGLY. Once I'm done with the SeaArk, I'm going to keep the bare ribs exposed and then mount the holders to the ribs. I just don't know how wide those ribs are. I need some strong holders for inshore saltwater rods that are 4/0 and 5/0 and about 7' long. Ideally something with a locking feature. I've seen the type with the bungee cords online.

What cha using ?
 
Hi Badbagger. I'm right down the road in Tally. Here's a pic of some DIY PVC tod holders I made out of some 1 1/4" PVC pipe and fittings. They're just dry fitted together, so I can disassemble them and add/subtract/repair it at any time. The whole ting is just mounted to the aluminum rubrail with a small stainless steel screw in each holder. It works great and only cost about $10.
 

Attachments

  • rod holder.jpg
    rod holder.jpg
    15.4 KB · Views: 704

Similar threads

Douglasdzaster
Project turned into a rebuild.
4 5 6
Replies
112
Views
11K
sonny1
S
U
DIY rod holder mounting without drilling holes
Replies
1
Views
709
eshaw
E
K
DIY rod holders for gunnel track systems
Replies
5
Views
3K
richg99
richg99
P
Rod Holders, Type and Mounting, Opinions Wanted
Replies
3
Views
2K
H20hawgs
H
B
Rod Holders For The New SeaArk
Replies
8
Views
2K
Bob Landry
B

Latest posts

Top