Painting in Cold Conditions

Fiberglass Supply Depot
Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
panFried

panFried

Well-known member
Joined
Jul 15, 2012
Messages
656
Reaction score
0
Location
Eureka, MO
Man all these builds and the anticipation of Spring have given me the itch. Ready to paint my tin but tis the season for cold weather. I'm not fortunate enough to have a heated shop, so wondering if painting at sub 50 temps is ok with longer drying times? Any first hand experience/advice?
 
Not really nothing to add cause I'm in the same place(waiting) on weather..As far as conditions for painting my paint can label has that info.Anyway if in doubt go with paint label info..Mine is ready for final sand/skuffing and prime and put on Ultra Tuff inside...Then flip and sand/skuff and prime and paint Outside..Waiting with Ya..Our day will come....cva34
 
Looks like forecast has SEMO hitting the upper 50's Saturday. So that meets the Spec's on the can of primer so may attempt a coat. Kinda do my paint job in chunks.
 

Similar threads

K
Significantly Disabled Veteran NEEDS 24v <70lb bow-mount hand tiller trolling motor w/50"+ shaft
Replies
2
Views
973
MDCrappie
M
jethro
Flooring/carpeting project
Replies
12
Views
2K
jethro
jethro
Shoedawg
Removing Glue/Adhesives - Chemical Experiment to Help U Out
2
Replies
22
Views
5K
Hanr3
Hanr3
BigTerp
Smoker build
Replies
14
Views
5K
BigTerp
BigTerp
Ail
DeSoto Mfg. 1415 Jon Boat modification/restoration.
Replies
18
Views
6K
Ail
Ail

Latest posts

Top