user 15101
Member
- Joined
- Aug 26, 2014
- Messages
- 5
- Reaction score
- 0
I need to install navigation lights and cleats on my new Tracker 1542 and wanted to get a little advice from you guys. I assume that my bow light needs to be a plug-in model on a short pole to get it up over the trolling motor mount. I also assume that it needs to be dead center of the bow, right?
I'm thinking I also need a cleat on the bow for tying off an anchor, but I'm not real sure where to place it. Take a look at my photo-chop job and let me know what you guys think. I don't really like the cleat being off to the corner like that. Do you guys see a better solution?
I'm really nervous to start drilling holes in my brand new boat, so I'm trying to take it slow. :shock:
Thanks.
I'm thinking I also need a cleat on the bow for tying off an anchor, but I'm not real sure where to place it. Take a look at my photo-chop job and let me know what you guys think. I don't really like the cleat being off to the corner like that. Do you guys see a better solution?
I'm really nervous to start drilling holes in my brand new boat, so I'm trying to take it slow. :shock:
Thanks.