TinBoats.net
The original aluminum boat site!
Shallow water anchor bracket?
- Thread starter Blake
- Start date
Help Support TinBoats.net:
For while it's in the water?
How about this simple, super cheap idea?
How about this simple, super cheap idea?
solid one piece (after it is glued together).
Custom made to fit your boat.
Rust - Corrosion Proof. Paint to match your boat.
Cheap !!!
Edit: if you fear that the PVC will crack and break off,
if the water is that rough, you probably would not stay put
no matter what you use.
Custom made to fit your boat.
Rust - Corrosion Proof. Paint to match your boat.
Cheap !!!
Edit: if you fear that the PVC will crack and break off,
if the water is that rough, you probably would not stay put
no matter what you use.
NCRoughneck
New member
- Joined
- Mar 2, 2015
- Messages
- 4
- Reaction score
- 0
PVC will crack and break, especially in current or when temps get colder. Been there, done that. I use a 4 foot piece of bungee cord with a stainless steel ring on one end and tie it off to the cleat on the other end. My anchor is just a solid fibergalss rod from grainger with a stainless tip and a handle
NC Roughneck, :WELCOME: to Tin Boats.
Please complete your profile when you have time.
Knowing what part of the country you hail from helps
us give you more accurate information.
Please complete your profile when you have time.
Knowing what part of the country you hail from helps
us give you more accurate information.
Barefoot_Johnny said:
Give it a rest!
Not everyone wants to disclose where they are from.
You post this 10 times everyday!
Talk to site admin if you want it to be mandatory.
He wasn't even asking information!
Enough already, you are annoying everyone!!
.
https://forum.tinboats.net/viewtopic.php?f=2&t=38641
.
https://forum.tinboats.net/viewtopic.php?f=2&t=38641
.
NCRoughneck
New member
- Joined
- Mar 2, 2015
- Messages
- 4
- Reaction score
- 0
NC roughneck, hmmm I wonder where I might be located. I agree that your response is quite annoying and should stop. Not to mention your "advice"
Insanity
Well-known member
I plain on using an eye bolt on mine.
On the same topic what is every one using for poles?
Which is why I don't already have one installed. Haven't found the rite pole yet. Guessing the store bought would cost a bit.
On the same topic what is every one using for poles?
Which is why I don't already have one installed. Haven't found the rite pole yet. Guessing the store bought would cost a bit.
