recessed cup holder

Insanity · Dec 25, 2015

So I no someone has done one or a dozen. What did everyone use for the cup part? I could use pvc but thinking a nice plastic cup hold that was solid and just dropped into the hole flush would look the best. Think I seen a cheap plastic one that would work at stores in the past. It was big on top and smaller in the bottom for differnet sized drink containers. It would also work great so you could reach inside to fish out baits when used for a catch all hole. And would hold my propane heater this winter. As it has a base made for cup holders.
Yea iv already got the stainless swivel type on my seats.

Johnny · Dec 25, 2015

I know they are out there and must be pretty inexpensive.
This is what came with my bass boat. There is a nipple on
the bottom to connect a drain hose to so the water can drain
onto the floor and not into your foamed cavity (if you have that).
I guess just google it - the name label is off these so I can't help there.

Edit: only took 45 seconds on Google to find these.
https://www.starmarinedepot.com/sea...ecessed.html?gclid=CJXqg9Hw98kCFYEfHwod3JwH7w

https://www.starmarinedepot.com/seachoice-drink-holder-black-small-recessed.html

.

Insanity · Dec 25, 2015

Lol at myself I didn't goggle it because I didn't figure they had one with a lip I could just drop in. But the First pic on the page was a alluinum cup for a poker table with a lip for 3 bucks or so. Still don't want to order one. But I might have to as it would work and look so nice.

richg99 · Dec 25, 2015

Insanity...please post the LINK for the cup holder that you found. Even cheapskate me won't build something if I can buy it for $3.00 I'll need a couple of them for my new hull.

thanks richg99

Johnny · Dec 25, 2015

You don't want to spend THREE BUCKS per each to
make your boat look so sweet and pretty ???

dang - I feel sorry for that poor nickle you been squeezing in your pocket. :roll:

TNtroller · Dec 25, 2015

Wally world has 'em in their "marine" section, may not have the drain hole, but have the lip

Insanity · Dec 25, 2015

TNtroller said:
Wally world has 'em in their "marine" section, may not have the drain hole, but have the lip

Thats what I was hoping for but i hadn't noticed. But then again wasn't looking then either. Thanks.
I sure hope I can borrow a hole saw from someone at work so I don't have to cut it with a jig saw.

Pappy · Dec 25, 2015

They also come with an LED ring around them as well.

Insanity · Dec 25, 2015

Johnny said:
You don't want to spend THREE BUCKS per each to
make your boat look so sweet and pretty ???

dang - I feel sorry for that poor nickle you been squeezing in your pocket. :roll:[/quote

Lol no I didn't mean I didn't want to spend that much just that Id rather have it in hand from a store. And not wait for it to come in the mail. :mrgreen:

Insanity · Dec 25, 2015

richg99 said:
Insanity...please post the LINK for the cup holder that you found. Even cheapskate me won't build something if I can buy it for $3.00 I'll need a couple of them for my new hull.

thanks richg99

https://www.discountpokershop.com/aluminum-cup-holder-black-medium-p-630.html?ref=42&gclid=CjwKEAiA7_OzBRDA8OfT3orp51oSJACVqslIsnzASlFJlGlDE30XEOCmMpW5OxjECU5L65vvgH_3ZRoC2uvw_wcB

They have them in stainless cheap to. 5 something

bobmwsc · Dec 30, 2015

Amazon has a 4 pack for $21 of the stainless steel with drains... https://www.amazon.com/Amarine-made-Stainless-Holder-Marine-Camper/dp/B0097MF4DU/ref=pd_sim_200_2?ie=UTF8&dpID=41DxPRnDU2L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=12FT8EQP7F04Z8QRCKY6

JMichael · Dec 31, 2015

bobmwsc said:
Amazon has a 4 pack for $21 of the stainless steel with drains... https://www.amazon.com/Amarine-made-Stainless-Holder-Marine-Camper/dp/B0097MF4DU/ref=pd_sim_200_2?ie=UTF8&dpID=41DxPRnDU2L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=12FT8EQP7F04Z8QRCKY6

Or you can buy them individually for a little higher price. As for the stainless models, I like this one better as it's a "large" holder at 3.5" but it's got the reduced dia section at the bottom of the holder for holding smaller drinks as well. Of course the drain hole is also useful but I could drill a hole in them if need be. LoL https://www.amazon.com/Amarine-made-Stainless-Holder-Marine-Camper/dp/B0097M90M6

PsychoXP18CC · Jan 1, 2016

West Marine and Bass Pro stock them here locally, I haven't checked but imagine Academy Sports and Cabelas do too. Drop in cupholders are actually pretty common in the stores that stock marine stuff, both in plastic and SS.

recessed cup holder

Help Support TinBoats.net:

Insanity

Well-known member

Johnny

Well-known member

Insanity

Well-known member

richg99

Well-known member

Johnny

Well-known member

TNtroller

Well-known member

Insanity

Well-known member

Pappy

Well-known member

Insanity

Well-known member

Insanity

Well-known member

bobmwsc

Well-known member

JMichael

Well-known member

PsychoXP18CC

Well-known member

Similar threads

Latest posts

recessed cup holder

Help Support TinBoats.net:

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!